Third Gen Chevy Camaro Tpi
Third Gen Chevy Camaro Tpi
|
On close inspection, Nicky points out the intake manifold will not cover the ports. Look at the gap. People caught in the middle of a Vortec head swap for their 1985-92 tuned-port had to spend a considerable amount of time and money to weld extra material onto their intake manifold, which also required machine work to mill the surface flat for proper mounting. When they welded the material to the top of the port they would also have to open the port up to match the Vortec head. And if they were really doing it right they would have to put a little material into the bottom of the intake manifold too so the ports would line up correctly. View Related Article
|
|